TALON™ ART TENSIONERS
Speed up your assembly and maintenance with TALON Auto-Retract Bolt Tensioners, the best tensioning technology for your bolting projects. Our unique design features significantly increase safety in the event of leaks and in high temperature situations. Utilize TALON ART Bolt Tensioners on your next joint assembly to achieve Certainty of Outcome, and watch your projects take off.
TALON Auto-Retract Bolt Tensioners is a patented product of INTEGRA Technologies. Visit our patents page to learn more!
FEATURES
HOW IT WORKS
Safety
Tensioning inherently provides superior safety benefits to torquing especially related to hand injuries in addition Talon ARTs provide increased safety versus alternative tensioners as oil will never impact the operator regardless of position due to purposeful design features in case of outer seal failure the oil exit path is dissipated inside the spring cap keeping the operator safe inner seal failure the oil exit path is dissipated inside the tensioner operator safe.
High Temperature Seals
The unique seals of the Talon ART enable use in hot situations alongside INTEGRA’s hot tensioning procedure.
Productivity
With automatic piston retraction the Talon ART can get more done in a shift while lowering operator fatigue.
Produced in North America
INTEGRA designs builds and supports the Talon ART line of tensioners in full from North America questions can be answered right away and problems can be remedied quickly by our talented group of engineers with over 30 years of experience tensioning hundreds of thousands of flanges Integra’s unmatched training and knowledge provide our partnered customers with safer faster more predictable and accurate loading of their bolted flanges.
Specifications & Dimensions
TALON™ ART bolt tensioners fit all standard ANSI flanges, with a standard bolt size range of ¾ – 4”. They provide up to 21,750 psi of operating pressure and have a 3/8” stroke. Standard specifications such as size, stress area, and maximum bolt load are listed below. For information regarding a TALON™ ART outside this range, please contact our experts.
Specifications Sheet
Tensioner |
Bolt Dia. |
Max. Load |
Piston Area |
Weight |
“A” |
“B” |
“C” |
“D” |
“E” |
“F” |
“G” |
|---|---|---|---|---|---|---|---|---|---|---|---|
lbf |
sq. in. |
lb |
O.D. |
Height |
Across Flats |
Bridge Dia. |
Chamfer |
Dist. To Obst. |
|||
ART 1 “a” |
3/4″ |
34148 |
1.57 |
4 |
2.48 |
3.29 |
0.85 |
2.20 |
12 deg |
5.26 |
|
ART 1 “a” |
7/8″ |
34148 |
1.57 |
4 |
2.48 |
3.42 |
0.90 |
2.38 |
12 deg |
5.38 |
|
ART 2 |
1″ |
63075 |
2.90 |
8 |
3.25 |
4.93 |
1.19 |
3.25 |
9 deg |
8.44 |
|
ART 2 |
1-1/8″ |
63075 |
2.90 |
8 |
3.25 |
4.68 |
1.32 |
3.25 |
9 deg |
7.81 |
|
ART 3 |
1-1/4″ |
104400 |
4.80 |
13 |
3.90 |
5.54 |
3.31 |
1.44 |
3.59 |
18 deg |
9.23 |
ART 3 |
1-3/8″ |
104400 |
4.80 |
13 |
3.90 |
5.67 |
3.53 |
1.69 |
3.59 |
19 deg |
9.36 |
ART 4 |
1-1/2″ |
148770 |
6.84 |
16 |
4.50 |
5.94 |
3.96 |
1.81 |
4.30 |
12 deg |
9.82 |
ART 4 |
1-5/8″ |
148770 |
6.84 |
16 |
4.50 |
5.94 |
3.96 |
1.81 |
4.30 |
12 deg |
9.70 |
ART 5 |
1-3/4″ |
217500 |
10.00 |
24 |
5.45 |
5.99 |
4.29 |
2.15 |
4.86 |
14 deg |
9.62 |
ART 5 |
1-7/8″ |
217500 |
10.00 |
24 |
5.45 |
5.99 |
4.29 |
2.15 |
4.86 |
14 deg |
9.49 |
ART 5 |
2″ |
217500 |
10.00 |
24 |
5.45 |
5.99 |
4.62 |
2.13 |
4.99 |
16 deg |
9.37 |
ART 6 |
2-1/4″ |
339082 |
15.59 |
42 |
6.95 |
6.77 |
“b” |
2.32 |
6.00 |
17 deg |
10.54 |
ART 6 |
2-1/2″ |
339082 |
15.59 |
43 |
6.95 |
7.02 |
5.55 |
2.54 |
6.65 |
14 deg |
10.79 |
ART 6 |
2-3/4″ |
339082 |
15.59 |
44 |
6.95 |
7.27 |
6.30 |
2.80 |
6.65 |
14 deg |
11.04 |
ART 7 |
3″ |
600300 |
27.60 |
78 |
8.95 |
7.78 |
6.75 |
2.97 |
7.66 |
21 deg |
11.65 |
ART 7 |
3-1/4″ |
600300 |
27.60 |
82 |
8.95 |
8.03 |
7.15 |
3.32 |
8.65 |
17 deg |
11.90 |
ART 7 |
3-1/2″ |
600300 |
27.60 |
83 |
8.95 |
8.28 |
8.00 |
3.44 |
8.65 |
20 deg |
12.15 |
| TENSIONER | B0LT DIA. | MAX. LOAD | PISTON AREA | WEIGHT | "A" | "B" | "C" | "D" | "E" | "F" | "G" |
| Ibf | sq. In. | Ib | O.D. | HEIGHT | ACROSS FLATS | BRIDGE DIA. | CHAMFER | DIST. TO OBST. | |||
| DIMENSION ARE IN INCHES UNLESS OTHERWISE NOTED | |||||||||||
| ART 1 "a" | 3/4" | 34148 | 1.57 | 4 | 2.48 | 3.29 | 0.85 | 2.20 | 12 deg | 5.26 | |
| 7/8" | 4 | 3.42 | 0.90 | 2.38 | 12 deg | 5.38 | |||||
| ART 2 | 1" | 63075 | 2.90 | 8 | 3.25 | 4.93 | 1.19 | 3.25 | 9 deg | 8.44 | |
| 1-1/8" | 8 | 4.68 | 1.32 | 3.25 | 9 deg | 7.81 | |||||
| ART 3 | 1-1/4" | 104400 | 4.80 | 13 | 3.90 | 5.54 | 3.31 | 1.44 | 3.59 | 18 deg | 9.23 |
| 1-3/8" | 13 | 5.67 | 3.53 | 1.69 | 3.59 | 19 deg | 9.36 | ||||
| ART 4 | 1-1/2" | 148770 | 6.84 | 16 | 4.50 | 5.94 | 3.96 | 1.81 | 4.30 | 12 deg | 9.82 |
| 1-5/8" | 16 | 5.94 | 3.96 | 1.81 | 4.30 | 12 deg | 9.70 | ||||
| ART 5 | 1-3/4" | 217500 | 10.00 | 24 | 5.45 | 5.99 | 4.29 | 2.15 | 4.86 | 14 deg | 9.62 |
| 1-7/8" | 24 | 5.99 | 4.29 | 2.15 | 4.86 | 14 deg | 9.49 | ||||
| 2" | 24 | 5.99 | 4.62 | 2.13 | 4.99 | 16 deg | 9.37 | ||||
| ART 6 | 2-1/4" | 339082 | 15.59 | 42 | 6.95 | 6.77 | "b" | 2.32 | 6.00 | 17 deg | 10.54 |
| 2-1/2" | 43 | 7.02 | 5.55 | 2.54 | 6.65 | 14 deg | 10.79 | ||||
| 2-3/4" | 44 | 7.27 | 6.30 | 2.80 | 6.65 | 14 deg | 11.04 | ||||
| ART 7 | 3" | 600300 | 27.60 | 78 | 8.95 | 7.78 | 6.75 | 2.97 | 7.66 | 21 deg | 11.65 |
| 3-1/4" | 82 | 8.03 | 7.15 | 3.32 | 8.65 | 17 deg | 11.90 | ||||
| 3-1/2" | 83 | 8.28 | 8.00 | 3.44 | 8.65 | 20 deg | 12.15 | ||||
| ART 8 | 3-3/4" | 705135 | 32.42 | 104 | 9.95 | 9.01 | "c" | 4.38 | 9.37 | 18 deg | 13.37 |
| 4" | 99 | 9.01 | "c" | 4.38 | 9.37 | 18 deg | 13.12 |
a The ART 1 is a manual retract tensioner
b Flats are 2.75″ from center on 6.5 deg. Angle
c Flats are 4.08″ from center on 7.5 deg. Angle
All tensioner are Designed to Fit a Heavy Hex Nut and a Minimum Bolt Protrusion (Above Nut) of One Bolt Dia.
TALON Auto-Retract Bolt Tensioners
TALON Auto-Retract Bolt Tensioners | Vlog with Mark Johnson
